Everflon™ ETFE (ethylenetetrafluoroethylene) is a melt processable fluoroplastic resin. Everflon™ ETFE fluoroplastics are ideal for wire coating and molding a wide variety of end use articles and components. Everflon™ ETFE has a wide service temperature range with characteristics of other fluoroplastic resins; low flammability, chemical resistance, exceptional dielectric and electrical properties, superior mechanical toughness, abrasion resistance and environmental robustness.
Everflon™ ETFE fluoroplastic grades have a service temperature range of 150°C- 200°C. In addition to these upper service temperature ranges, Everflon™ ETFE also retains its useful properties at cryogenic temperatures.
While Everflon™ ETFE can be fabricated into solid shapes and molded articles it is best known as an industry leading product line in the wire and cable industry where it is used for wire coating and cable jacket fabrication. Everflon™ ETFE offers wire and cable OEMs a high performance fluoroplastic material with excellent electrical properties, ease of processing and extreme toughness.
The Everflon™ ETFE product line is one the broadest in the industry. With Melt Flow Rates (MFR) from 2 to 30, and a wide range of application specific grades, Everflon™ ETFE is uniquely positioned to offer exceptional performance in both general purpose, thin wall and wire and cable constructions.
Special Everflon™ ETFE grades are also available for special applications involving rotational molding and where static dissipative or adhesion properties are required.
| Type and Grade | Characteristics | Applications |
| ETFE 4003 |
MFI: 2-4 for moulding |
Seals, valve seats, gaskets, tank lining |
| ETFE 4010 |
MFI: 6-12 for extrusion |
Tubing and jacket of wire |
| ETFE 4020 |
MFI 20-30 for extrusion and injection |
Insulation of wire&cable |
 |
 |
 |
Everflon™ Fluoropolymer ETFE Worldwide
--------------
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
------------------
 |
 |
-----
 |
 |
 |
 |
-----
|
Everflon+ ETFE Color Concentrate and Pre-cololred Resin Reap the benefits of excellent pigment dispersion in your final polymer mix with Everflon+™ masterbatch formulations for PFA polymers. Pigment concentration and viscosity can be tailored to your specific application, and formulations are suitable for end-products with wall thicknesses that are as thin as one millimeter or 25 microns.
|
Everflon+ Cross Linked ETFE Foamed Fluorinated Ethylene Propylene, also referred to as Foamed PFA, is a form of fluoropolymer insulation. As it sounds, the insulation is a form of foam. It has similar properties to PFA and is very resistant to chemicals, has a broad temperature range and exhibits excellent electrical properties.
|
Everflon+ ETFE Conductive Resin Conductive polymers such as ETFE are a class of materials that exhibit electrical conductivity while maintaining the mechanical properties and processability of traditional polymers. These materials have garnered significant attention and research interest due to their unique combination of properties, which offer a wide range of potential applications. |
|
 |
 |
 |
If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.
